bearing housing sentence in Hindi
Sentences
Mobile
- Equivalent offset on the right bearing housing to get parallel misalignment.
- Spectral comparisons should be made across coupling measurement points on left bearing housing and the motor.
- The input stress can be easily measured via strain gauge measurement of the input pinion bearing housing.
- The oil pump in the crankshaft bearing housing creates oil pressure and pumps the oil from the oil sump through the engine.
- In this design, shims are installed between the two halves of the bearing housing and then the bore is machined to size.
- Creative Precision Inc . of Folsom won a $ 29, 725 contract from the Defense Industrial Supply Center in Philadelphia for bearing housing liner.
- The Boeing Co . of Philadelphia won a $ 99, 414 contract from the Naval Inventory Control Point in Philadelphia for bearing housing units.
- Subaru will check 1, 977 cars to check for a casting flaw in the right front bearing housing that could lead to loss of vehicle control.
- The recall involves the inspection of fuel hoses, rear center seat belts and right front wheel bearing housings on some models, including Legacy L, GT and Outback.
- One day her engineers displayed with pride a 28-pound bearing housing that could be installed by one airman putting his shoulder to the part as he bolted it on.
- This Cobra had a footboard surface that was smoother, the bearing housing was redesigned, the cam shapes were altered slightly, and the baseplate came with a feature called the Cobra Coil.
- For this experiment we can use three different stiffness couplings, four levels of offset should be used on the left bearing housing to simulate a combination of angular and parallel misalignment.
- At standstill, or while on standby, pump and driver bearings are preserved by the surrounding oil mist, which exists in the bearing housing space at a pressure just barely higher than ambient.
- Consisting of a stationary linear base and a moving carriage, roller slides work similarly to ball bearing slides, except that the bearings housed within the carriage are cylinder-shaped instead of ball shaped.
- The bearing housing height has been increased to improve lubrication; its mounting flange thickness has been substantially increased; the geometry of the top and bottom liners in the bearing housing has been altered to further reduce incidence of rocking.
- The bearing housing height has been increased to improve lubrication; its mounting flange thickness has been substantially increased; the geometry of the top and bottom liners in the bearing housing has been altered to further reduce incidence of rocking.
- The resulting imbalance caused reverse bending loads on the bolt heads of the bearing assembly resulting in the failure of one bolt head, which created even more stresses and caused the bearing housing to open after the next 5 bolts had failed.
- The old RB303 tonearm has been replaced by a new RB330 version of the classic, with patent pending " zero-tolerance " bearings, stiffer vertical bearing housing, redesigned bias ( anti-skate ) housing, improved three-point plinth mounting, a new arm tube coating, and new arm wiring.
bearing housing sentences in Hindi. What are the example sentences for bearing housing? bearing housing English meaning, translation, pronunciation, synonyms and example sentences are provided by Hindlish.com.